Furnace Repair in Spruce Grove and Stony Plain

Furnace repair for homes with no heat, weak or cold airflow, strange noises, short cycling or ignition problems.

Furnace not keeping up with the cold? Don't wait to get it looked at.

When a furnace stops heating properly, a technician finds the cause and fixes it. A repair visit usually starts with a diagnosis: checking the thermostat, filter, ignition, flame sensor, blower and venting before replacing any parts.

In winter, a furnace problem can turn into an emergency quickly, so don't wait to get help.

If you smell gas, leave the house first. Then call your natural gas utility's emergency line or 911 from outside. Never try to fix a gas leak yourself.

If your furnace is older and breaking down often, compare the repair with furnace replacement. A yearly furnace tune-up catches many problems before they become a breakdown.

Signs you need Furnace Repair

  • No heat, or the house won't reach the temperature on the thermostat
  • The furnace turns on and off in short bursts (short cycling)
  • Banging, squealing, rattling or grinding noises
  • Some rooms are much colder than others
  • The blower runs but the air coming out is cold
  • Heating bills jump without any change in how you use the house
  • A yellow or flickering burner flame instead of a steady blue one

Common problems

  • A dirty or clogged air filter restricting airflow
  • A faulty igniter or flame sensor
  • Thermostat settings, batteries or wiring
  • A worn blower motor
  • Intake or exhaust pipes outside blocked by snow or ice
  • A failed control board or limit switch

What the job involves

  • The technician asks what you've noticed and checks the thermostat
  • They inspect the filter, burners, igniter, flame sensor and blower
  • They check the venting and safety controls
  • They explain what's wrong. Ask for the repair price before work starts
  • After the repair, they run the furnace through a full heating cycle to confirm it works

Furnace Repair by area

Furnace Repair questions

Why is my furnace running but blowing cold air?

Cold air from a running furnace usually means the burners aren't lighting, often because of an ignition, flame sensor or gas supply problem. First check that the thermostat fan is set to auto, not on. If it is, call for a repair.

What should I check before calling for furnace repair?

Check four things: the thermostat is set to heat and above room temperature, the furnace power switch and breaker are on, the air filter isn't clogged, and the pipes outside aren't blocked by snow or ice. If all four are fine, call for repair.

Is it safe to keep using a furnace that's making strange noises?

Not always. A loud bang at start-up, or constant grinding or squealing, can mean a part is failing, so turn the furnace off and call for repair. If you smell gas or your carbon monoxide alarm sounds, leave the house and call 911 from outside.

Why does my furnace keep turning on and off?

Short cycling is often caused by a dirty filter, a furnace that's overheating, a faulty flame sensor or a thermostat in the wrong spot. It wears out parts and wastes energy, so have it checked.

Should I repair or replace my furnace?

Repair usually makes sense for a newer furnace with one failed part. Replacement is worth considering when the furnace is older, breaks down often, or has a major failure like a cracked heat exchanger. Ask for a repair price and a replacement price so you can compare.

How can I avoid furnace breakdowns?

Change your filter regularly and book a heating check-up every fall, before the cold arrives. Natural Resources Canada recommends scheduling heating system maintenance in the fall.

Need Furnace Repair?

Call or send a quote request online.